CX625 Cross Trainer - FAQ

Maintenance
The joints should be lubricated with grease at least once a year.
Cleaning
To keep your elliptical trainer in optimal condition, simply clean it with a soft cloth and a mild cleaning agent. Please avoid using abrasive cleaners or solvents on plastic parts to prevent damage. You should carefully wipe the sweat off the equipment after every workout. Take special care to avoid excessive moisture on the computer display, as this could cause an electrical hazard or electronic failure. Protect the elliptical trainer, especially the computer console, from direct sunlight to prevent screen damage. Also check all assembly screws and pedals weekly to ensure they are secure and the equipment is safe and functional.

Turn the end cap on the rear stabilizer as far as necessary to level the elliptical trainer.

Please carefully remove the computer console and make sure that the cables coming from the console are correctly and securely connected to the corresponding cables in the front post. Also check whether the batteries are inserted correctly and whether the battery contacts and springs are making sufficient contact with the batteries. If the batteries in the computer console are depleted, they need to be replaced with new ones. These steps will ensure that your computer console functions properly and reliably.

To ensure optimal performance and accuracy of the hand pulse sensors on your exercise equipment, it is essential to regularly check that the cable connections are secure. For accurate pulse readings, it is advisable to hold both handgrip sensors with both hands rather than touching them with just one hand, as is often done when checking heart rate. Gripping too tightly may affect the accuracy of the readings. We therefore recommend applying moderate pressure while holding the sensors for the best possible results.

The screws on the elliptical trainer may have come loose. Please check the screws and tighten any that are loose.

Here's the video: