SX600 Speed Bike FAQ
Product photo
SX600 assembly video
Troubleshooting & quick fixes
Loud, disruptive noises coming from the bottom bracket, flywheel or wheel fairing/cover
The SX600 bike should be checked by a technician. Please fill out the contact form at the end of the FAQ page.
The handlebar unit cannot be secured/is wobbly
There is a screw in the handlebar quick-release clamp (under the cap) that needs to be tightened. This will give the quick-release clamp the correct tension and should prevent it from slipping.
The SX600 makes a clicking noise when adjusting the resistance
The motor is probably defective; you can replace it yourself. During the warranty period, we recommend sending the device in for inspection. Please fill out the contact form at the end of the FAQ page.
What is the password for the factory settings?
We cannot provide you with this password. Entering it will reset (delete) the entire operating system of your sports equipment, after which a new operating system will need to be installed. The password is intended exclusively for factory settings and can only be accessed by the manufacturer. Thank you for your understanding.
The quick-release clamp is not working
There is a screw in the quick-release clamp (covered by a black cap from above). This screw needs to be tightened.
What data can I transfer to the SX600 console using a USB stick?
The console can only process Mp3 and Mp4 files. The capacity of the USB stick does not matter.
The seat post is too short
We have a 59 cm version, which is 5 cm longer than the short version. If yours is not the same length, you can reorder the spare part number "SP_SX600_10L". You can find detailed instructions on ordering the spare parts you need in this article: How can I get the spare parts I need?.
How do I use the console?
Using the SX600 console
How do I use the app?
Using the SX600 app
The spare parts list contains all the individual parts used, from assembly through to use.
The manual contains all the important information.