IT300 Inversion Table FAQ

Inversion tables are often used to stretch and relax the spine, improve circulation, reduce muscle tension, and increase flexibility. They are often used by people for general relaxation and stretching. During inversion, the body is positioned upside down, with the feet above the head.

Order a new brake set. For detailed instructions on ordering the replacement parts you need, see this article: How do I get the replacement parts I need?.

Please check the spare parts list to see which part numbers need to be replaced. For detailed instructions on ordering the replacement parts you need, see this article: How do I get the replacement parts I need?. Replacing spare parts will not affect your warranty.

• Make sure to tighten all screws/nuts properly after assembly and before use.
• Clean the device regularly with a slightly damp cloth and a mild cleaning agent. Do not use solvents to clean the device. Regularly apply a little silicone oil to the weight guide tube.
• This is especially important for the padding and handles, as your body is in constant contact with these parts during training. You can cover the padding with a towel during training to protect it.
• Before each use, check that all pulleys move freely. Pulleys that do not move easily can cause excessive wear and/or damage to the cables. If one or more pulleys are stuck, check that they are installed correctly. Never grease the contact surface between the pulley and the cable! If you are unsure, please do not hesitate to contact our customer service team.
• Regularly apply a little silicone oil to the weight guide tube.
• Lubricate all moving part axles once every one to two years. You can use standard commercially available grease.